Piaggio Liberty 125 S [2021-2026] - Aluminum cylinder ø 63 pin ø 14 4-stroke

✔️ New part
ID: 15713659486534

$716.15 AUD

DELIVERY
Ready to ship | in 2-6 business days
Delivery with DHL in 10-20 business days.
PRODUCT DESCRIPTION

Aluminum cylinder with 63 mm bore for the Piaggio Liberty 125 S

The MALOSSI aluminum cylinder ø 63 pin ø 14 4-stroke is intended for the Piaggio Liberty 125 S in the 2021-2026 model year range. The version has a bore of 63 mm, a stroke of 58.6 mm and a displacement of 182.67 cm³. The compression ratio is 11.15:1.

Technical features

  • Cylinder material: primary aluminum alloy with high content of hardened and tempered silicon
  • Cylinder liner with silicon carbide coating in electroplated nickel form
  • Cross smoothing with two diamond passes and very limited tolerances
  • Cylinder-piston connection with a tolerance of 0.05 mm
  • Recalculated and improved heat exchange surfaces
  • Piston made of special aluminum alloy with high silicon content and low thermal expansion
  • Tin coating on the sliding surfaces as well as a weight-reduced and reinforced design
  • Piston with 3 rings and special rings with high sliding properties and very high mechanical strength

Vehicle assignment and installation instructions

The vehicle assignment is: Piaggio Liberty 125 S, built between 2021 and 2026. The cylinder must only be installed with the Force Master 2.1 control unit. The design is intended as a racing component for competitions at designated venues in accordance with the regulations of the relevant sports associations. No liability is assumed for improper use.

Description

Aluminum cylinder with 63 mm bore for the Piaggio Liberty 125 S

The MALOSSI aluminum cylinder ø 63 pin ø 14 4-stroke is intended for the Piaggio Liberty 125 S in the 2021-2026 model year range. The version has a bore of 63 mm, a stroke of 58.6 mm and a displacement of 182.67 cm³. The compression ratio is 11.15:1.

Technical features

  • Cylinder material: primary aluminum alloy with high content of hardened and tempered silicon
  • Cylinder liner with silicon carbide coating in electroplated nickel form
  • Cross smoothing with two diamond passes and very limited tolerances
  • Cylinder-piston connection with a tolerance of 0.05 mm
  • Recalculated and improved heat exchange surfaces
  • Piston made of special aluminum alloy with high silicon content and low thermal expansion
  • Tin coating on the sliding surfaces as well as a weight-reduced and reinforced design
  • Piston with 3 rings and special rings with high sliding properties and very high mechanical strength

Vehicle assignment and installation instructions

The vehicle assignment is: Piaggio Liberty 125 S, built between 2021 and 2026. The cylinder must only be installed with the Force Master 2.1 control unit. The design is intended as a racing component for competitions at designated venues in accordance with the regulations of the relevant sports associations. No liability is assumed for improper use.

Question about this article