Lambretta V Special 125 [2023-2024] - YSS gas pressure monoshock rear

✔️ New part
ID: 15704683413830

$272.54 AUD

DELIVERY
Ready to ship | in 2-6 business days
Delivery with DHL in 10-20 business days.
PRODUCT DESCRIPTION

Gas pressure monoshock for the rear wheel

The YSS monoshock is designed as a direct replacement for the standard rear strut of the Lambretta V Special 125. It belongs to the Z-Series of the TOP Line and works as a gas emulsion shock absorber with an integrated cylinder.

Adjustable suspension tuning

Spring preload and rebound can be adjusted. This means that two essential parameters are available to adapt the setup of the rear chassis to the respective requirements. The application-specific basic and spring tuning is tailored to the specified vehicle assignment.

  • Settings: Preload and Rebound
  • Shock absorber piston: 30mm diameter
  • Shock absorber rod: 12mm diameter
  • Length: 345mm
  • Spring Rate: 46-25-35-220
  • Color: Red

Design and use

The gas emulsion design is used to absorb linear impacts in a controlled manner. The shock absorber combines the integrated cylinder with adjustable preload and rebound damping. This makes it a technically clearly defined replacement option if the rear series spring strut is to be replaced.

Vehicle assignment

The YSS gas pressure monoshock is assigned to the Lambretta V Special 125 built between 2023 and 2024.

Homologation and selection information

The shock absorber is E-tested. Before installation, the length of 345 mm and the connection and installation conditions on the vehicle should be checked in particular. After installation, the existing adjustment options should be appropriately tailored to the intended use.

Description

Gas pressure monoshock for the rear wheel

The YSS monoshock is designed as a direct replacement for the standard rear strut of the Lambretta V Special 125. It belongs to the Z-Series of the TOP Line and works as a gas emulsion shock absorber with an integrated cylinder.

Adjustable suspension tuning

Spring preload and rebound can be adjusted. This means that two essential parameters are available to adapt the setup of the rear chassis to the respective requirements. The application-specific basic and spring tuning is tailored to the specified vehicle assignment.

  • Settings: Preload and Rebound
  • Shock absorber piston: 30mm diameter
  • Shock absorber rod: 12mm diameter
  • Length: 345mm
  • Spring Rate: 46-25-35-220
  • Color: Red

Design and use

The gas emulsion design is used to absorb linear impacts in a controlled manner. The shock absorber combines the integrated cylinder with adjustable preload and rebound damping. This makes it a technically clearly defined replacement option if the rear series spring strut is to be replaced.

Vehicle assignment

The YSS gas pressure monoshock is assigned to the Lambretta V Special 125 built between 2023 and 2024.

Homologation and selection information

The shock absorber is E-tested. Before installation, the length of 345 mm and the connection and installation conditions on the vehicle should be checked in particular. After installation, the existing adjustment options should be appropriately tailored to the intended use.

Question about this article