KTM 250 EXC TPI [2018-2022] - Rad Valve RC2 membrane block carbon slats KTM/HVA

BOYESEN Rad Valve RC2 for the KTM 250 EXC TPI

The BOYESEN Rad Valve RC2 membrane block is tailored to the KTM 250 EXC TPI from 2018-2022. Its design combines a flow-optimized intake duct with model-specific membrane slats and thus supports an efficient air supply in the intake system.

Flow-optimized design

• The membrane block has a body made of 100% aluminum.
• The aerodynamically designed inner surface supports even guidance of the intake air.
• Four aerodynamic directional dividers distribute the incoming charge at an angle evenly and are designed to guide air without loss of flow.

Carbon membrane slats for the KTM 250 EXC TPI

The RC2 series uses model-specific tensioned membrane slats made of aerospace carbon material. The variable slat tension is tailored to the respective model, year of manufacture and displacement. A rubber coating and the fuel resistance of the slats support a permanently tight seal.

The design of the Rad Valve RC2 is aimed at an optimized intake system with efficient air supply. Depending on the application, the design features can influence the acceleration and peak performance of the respective motorcycle.

Assembly and vehicle assignment

• Suitable for KTM 250 EXC TPI, years 2018-2022.
• A carburettor neck clamp and gasket are included.
• No modifications are required for assembly.

The vehicle-specific design makes the membrane block a targeted selection for the aforementioned KTM 250 EXC TPI in the entire 2018-2022 model year range.