Vespa Cosa 200 [1988-1997] - gear set Z 55/40/37/36 for Vespa

MALOSSI gear set Z 55/40/37/36 for Vespa Cosa 200

The MALOSSI gear set is designed for the Vespa Cosa 200 from the 1988-1997 model year range. The set uses a tooth configuration that differs from the original design, allowing the gear ratio to be adjusted across the four gears.

Design and manufacturing

• Number of teeth: Z 55/40/37/36
• Wheels made of specially hardened steel
• Manufacture with CNC hobbing machines
• Ground contact surfaces
• Relief holes, if structurally possible

The gear pairings were calculated for an optimized gear ratio. Small depressions in the contact surfaces support the transport of oil between the gears. This improves the lubrication of the sliding contact surfaces during operation. The relief holes take the design requirements of the wheels into account; This was omitted in the area between the wheel and the gear selector lever so as not to cause any breakage.

Vehicle assignment

Suitable for Vespa Cosa 200, built between 1988 and 1997.

Important usage notice

This product is intended exclusively for racing in specially designated locations in accordance with the regulations of the relevant sports authorities. Use outside of this intended area of ​​use may constitute improper use.